Digital/Dial Pipe Pit Gauge

Digital/Dial Pipe Pit Gauge

Getting accurate pit depths and corrosion profiles can sometimes be a problem. Measuring on rounded surfaces or upside down could yield unreliable results. PGD-1200: 12″ bridge with digital gauge, PGD-1800: 18″ bridge with digital gauge, PGMB: 4″ bridge “Micro Bar”, PGMBD: 4″ bridge “Micro Bar” with digital gauge, PG1200SB: 12″ Step Bar. GAL-USA PG-1200 Digital Pit Gauge by Exacto Cat # PG-1200 Profiles can be assessed quickly and accurately by sliding the digital gauge along the bridging bar. Notched feet and ceramic magnets prevent the bridge from rocking on the pipe. The magnets securely hold the bridge in place which makes it ideal when working upside down. Locking adjustment screws allows instant calibration to reference surface. Pointed and needle tips find the deepest section of pits with ease. GAL-USA 0-1″ / 0-25mm Electronic Depth / Pit Gauge Cat # SPI13-749-7 Large LCD – 0.0005″ (0.01mm) Resolution, ±0.001″ (0.025mm) Accuracy, 0.06″ Dia Probes, 2 3/8″ Base, Fitted Case & Battery Included, Certificate of Calibration Traceable to NIST, Measurement Scale: Inch / Metric. GAL-USA Digital Pit Depth Gauge Cat # 13DPR W/Probes & Rods 1″ – 6″. Measurement Scale: Reads BOTH Inch & Metric. Probes Included: .025 & .062 Diameter. CR2032 Battery Included. Certificate of Calibration Traceable to NIST. GAL Cat # SPI13-749-7 0-1″ / 0-25mm Electronic Depth / Pit Gauge Large LCD – 0.0005″ (0.01mm) Resolution, ±0.001″ (0.025mm) Accuracy, 0.06″ Dia Probes, 2 3/8″ Base, Fitted Case & Battery Included, Certificate of Calibration Traceable to NIST, Measurement Scale: Inch / Metric.