The Rust Grade Book Swedish Standards BS EN ISO 8501-1:2007/SIS 055900

  1. Home
  2. The Rust Grade Book Swedish Standards BS EN ISO 8501-1:2007/SIS 055900

The Rust Grade Book Swedish Standards BS EN ISO 8501-1:2007/SIS 055900

Swedish Standard (ISO 8501, SIS 055900) – The original visual standard. It shows the degree of cleanliness of four different levels of rusted steel cleaned by blasting. This international standard discusses the preparation of steel for the acceptance of paints and coatings, and provides a visual reference for the assessment of steel surfaces prior to and after cleaning. Published by the International Organization for Standardization (ISO) in collaboration with the Swedish Standards Institute (SIS). surface preparation standards for painting steel surfaces. st3 surface preparation. sa 2.5 surface preparation. surface preparation for painting. swedish standard sis 05 59 00. BS EN ISO 8501, SIS 055900, ASTM D 2200 Method A. ISO Rust Grade Book. Elcometer E128-1. TQC Illustrated book ISO 8501-1 TQC LD3020. SA 2 thorough blast cleaning:Commercial finish 65% clean. The surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust, paint coatings and foreign matter. Any residual contamination should be firmly adhering. SA 2.5 very thorough blast cleaning: Near white metal 85% clean. The surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust, paint coatings and foreign matter. The metal has a greyish colour. Any traces of contamination shall be visible only as slight stains in the form of spots or stripes. SA 3 blast cleaning to pure metal: White metal 100% clean. The surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust, paint coatings and foreign matter. The blasted surface must have a uniform metallic colour. BRUSH OFF, NACE No. 4/SSPC-SP7 SWEDISH Sa.1. COMMERCIAL, NACE No. 3/SSPC-SP6 SWEDISH Sa.2. NEAR WHITE METAL, NACE No. 2/SSPC-SP10 SWEDISH Sa.2.5. WHITE METAL, NACE No. 1/SSPC-SP5 SWEDISH Sa.3. RUST GRADES : A Surface mostly covered with adherent mill scale, with little or no rust. B Mill scale has begun to flake, rust has started to form. C Mill scale has rusted away or can be scraped off easily and slight pitting has taken place. D Mill scale has rusted away and general pitting can be seen with naked eye. Nace 1, SP5, Sa 3 = 0%. Nace 2, SP10, Sa2.5 = 5% Staining. Nace 3, SP6, Sa2 = 33% Staining. Nace 4, SP10, Sa1 = 100% as long as its tightly adherent. ISO 8501-1:2007(en) Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings. surface preparation standards, sa 2.5 surface preparation, surface preparation standards for painting steel surfaces, sandblasting standards pdf, iso 8501-1 pdf, iso 8501-1:2007, ISO 8501 — Visual assessment of surface cleanliness, swedish standard sa 2.5 pdf, ISO 8501 identifies four levels (designated as “rust grades”) of mill scale and rust that are commonly found on surfaces of uncoated erected steel and steel held in stock. It also identifies certain degrees of visual cleanliness (designated as “preparation grades”) after surface preparation of uncoated steel surfaces and of steel surfaces after overall removal of any previous coating. These levels of visual cleanliness are related to the common methods of surface cleaning that are used prior to painting. sis 05 5900, surface preparation standards, grit blasting standards, sis 05 5900 free download, iso 8501-1, grit blasting standards, sa 2.5 standard pdf, sa 2.5 surface profile measurement,iso 8501-1 pdf, sa 2.5 standard, iso 8501-1:2007 pdf, bs en iso 8501-3 preparation grade, iso 8501-1 standard pdf, iso 8501 1 1988, sa 2.5 surface profile microns, iso 8501-1 sa 2 1/2. BRUSH OFF, NACE No. 4/SSPC-SP7 SWEDISH Sa.1. COMMERCIAL, NACE No. 3/SSPC-SP6 SWEDISH Sa.2. NEAR WHITE METAL, NACE No. 2/SSPC-SP10 SWEDISH Sa.2.5. WHITE METAL, NACE No. 1/SSPC-SP5 SWEDISH Sa.3. Sand blasting standards: Swedish SA 1, SA 2, SA 2.5, SA 3 vs. NACE, ISO 8501 is intended to be a tool for visual assessment of rust grades and of preparation grades. It includes 28 representative photographic examples. swedish standard sis 05 59 00. iso 8501 pdf free download iso 8501-3 pdf, BLAST CLEANING – PREPARATION GUIDES grade – BS 7079 SS 05 59 00 description, when viewed with the naked eye SA 2 thorough blast cleaning:Commercial finish 65% clean The surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust, paint coatings and foreign matter. Any residual contamination should be firmly adhering. SA 2.5 very thorough blast cleaning: Near white metal 85% clean The surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust, paint coatings and foreign matter. The metal has a greyish colour. Any traces of contamination shall be visible only as slight stains in the form of spots or stripes. SA 3 blast cleaning to pure metal: White metal 100% clean The surface shall be free from visible oil, dirt and grease, from poorly adhering mill scale, rust, paint coatings and foreign matter. Nace 1, SP5, Sa 3 = 0%. Nace 2, SP10, Sa2.5 = 5% Staining. Nace 3, SP6, Sa2 = 33% Staining. Nace 4, SP10, Sa1 = 100% as long as its tightly adherent. The blasted surface must have a uniform metallic colour. sand blasting profile books for SA2 and 2 1/2 with complete pictures. BLASTING GRADE COMMON STANDARDS COMPARISON SSPC steel structures painting council, BS 7079 British standards, SS 05 59 00 Swedish standards, BS 4232, NACE, National Association of Corrosion Engineers. White metal (SP5) SA 3 1st quality grade 1. Near white metal (SP10) SA 2.5 2nd quality grade 2. Commercial finish (SP6) SA 2 3rd quality grade 3. photographs of standard blasting profiles like Sa 2, Sa 2.5, Sa, 3. RUST GRADES – A Surface mostly covered with adherent mill scale, with little or no rust. B Mill scale has begun to flake, rust has started to form. C Mill scale has rusted away or can be scraped off easily and slight pitting has taken place. D Mill scale has rusted away and general pitting can be seen with naked eye. iso 8501-1 standard pdf, iso 8501-2 pdf, iso 8501 1 1988, iso 8501-1 st2, sa 2 1 2 surface preparation, iso 8502, grade Sa 2½ in accordance with  ISO 8501-2, Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings. ISO 8502 (all parts), Standard SSPC NACE ISO 8501-1. 12944-4. SP 5 1 – SA 3. SP 10 2 – SA 2 1/2. SP 6 3 – SA 2. SP 7 4 – SA 1. SP 1 – solvent cleaning. SP 11 – ST 3 with Rz = 30 µm. SP 3 – PMa. Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness. ISO 8503 (all parts), Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates. ISO 8504-2, Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning. ISO 8504-3, Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 3: Hand- and power-tool. cleaning. ISO 11124-2, Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit. ISO 11124-3, Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-carbon cast-steel shot and grit. ISO 11125-3, Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determination of hardness. ISO 11126-3, How to measure the profiles SA2,SA2.5 & SA3 at site. Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag. st. 3 0 sis 055900. ISO 11126-4, Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Coal furnace slag. swedish standard rust grade, iso surface comparator pictorial, sandblasting sa 2.5 color shade card, bs en iso 8501-1 2007/sis 055900, sis 05 5900 sa 2.5 pictorial, Swedish Standard SIS-055900 with a roughness profile of 50-70 microns.

1
1

 

error: Content is protected !!