Defelsko PosiTest Type 1 Magnetic Coating Thickness Gages, Analogue / Mechanical Coating Thickness Gauge

Defelsko PosiTest Type 1 Magnetic Coating Thickness Gages, Analogue / Mechanical Coating Thickness Gauge

PosiTest Magnetic Pull-Off Thickness Gage For: Hot dip galvanizing, hard chrome metalizing, paint, enamel, plastic coatings on steel. Type 1 Gage is a magnetic pull-off thickness gage for the Non-destructive measurement of non-magnetic coatings. Model PosiTest FM Range 0-80 mils, TOLERANCE: ± 0.2 mils up to 4 mils ±5% of the reading over 4 mils, Hot dip galvanizing, hard chrome metalizing, paint, enamel, plastic coatings on steel. Model PosiTest F Range 0-2000 µm, TOLERANCE: ±5 µm up to 100 µm ±5% of the reading over 100 µm, Hot dip galvanizing, hard chrome metalizing, paint, enamel, plastic coatings on steel. Model PosiTest GM Range 0-8 mils, TOLERANCE: ±0.04 mils up to 0.8 mils ±5% of the reading over 0.8 mils, Electroplating, thin paint films, phosphating on steel. Model PosiTest G Range 0-200 µm, TOLERANCE: ±1 µm up to 20 µm ±5% of the reading over 20 µm, Electroplating, thin paint films, phosphating on steel. Highly wear resistant Carbide Probe for longest life and continuous accuracy. Extra rugged housing, not affected by mechanical shock, water, acid or solvents. Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement. Positive visual and audible indicators to designate when thickness reading is established. “V” grooves in probe housing and gage base allow correct positioning on cylindrical objects.
PosiPen Magnetic Pull-Off Coating Thickness Gage PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel. Can be used on small, hot or hard-to-reach surfaces. Easy-to-Use. Lightweight – easy to carry, just like a ball point pen. Rugged – not affected by mechanical shock, acid, oil, water and dust. No user adjustment required. Highly wear resistant probe tip for long life and continuous accuracy. Used for: Small, hot or hard-to-reach surfaces. Spot Checks – conveniently fits in a shirt pocket. Hot Sprayed Coatings. Ideal for: Refineries, petrochemical plants Platers – electroplating, chrome, zinc, galvanizing. Powder coaters Simple Easy-to-Use. Lightweight – easy to carry, just like a ball point pen Durable No batteries/Electronics. Rugged – not affected by mechanical shock, acid, oil, water and dust Accurate. No user adjustment required. Long Form Certificate of Calibration traceable to PTB included. Highly wear resistant probe tip for long life and continuous accuracy. English Range 0.25 to 20 mils, Tolerance +/-10% and 0.1 mil, Temperature -150° F to + 450° F. Metric Range 5 to 500 microns, Tolerance +/-10% and 2.5 microns, Temperature -100° C to + 230° C.