Defelsko PosiTector 200 Digital Coating Thickness Gauge for Concrete, Wood, Plastic, Fibreglass, Polyurea, Asphaltic Neoprene & very thick Polymers.
Defelsko PosiTector 200 Digital Coating Thickness Gauge for Concrete, Wood, Plastic, Fibreglass, Polyurea, Asphaltic Neoprene & very thick Polymers.
Defelsko PosiTector 200 non-destructively measures a wide variety of applications using proven ultrasound technology. Masonry substrates include stone, brick, tile, cast concrete, pre-cast concrete, concrete block, asbestos-cement board, renderings and plasterboard. Masonry substrates are often porous with varying degrees of surface roughness. While useful in promoting adhesion, such porosity and roughness increases the difficulty in attaining repeatable thickness measurements. Masonry coatings are used for a multitude of purposes including cosmetic appearance, durability, abrasion resistance, as well as protection from elements such as moisture, salt, chemical and ultra-violet light. Common coatings for concrete include latex paints, acrylics, lacquers, urethanes, epoxies, and polyester resins. Measures coating thickness over wood, concrete, plastics, composites, metals and more.Advanced models measure up to 3 individual layer thicknesses in a multi-layer system and features a graphic readout for detailed analysis of the coating system. Standard B/Std 200 B1 PT-200B-S Advanced B/Adv 200 B3 PT-200B-A Included Probe PRB200B to measure polymer coating on wood, plastic, etc Certified Thickness Standard STDA3. Measurement Range 13 to 1000 μm / 0.5 to 40 mils Typical Applications polymer coating on wood, plastic, etc. Standard C/Std 200 C1 PT-200C-S Advanced C/Adv 200 C3 PT-200C-A Included Probe PRB200C to measure Coatings on concrete, fiberglass, etc Measurement Range 50 to 3800 μm / 2 to 150 mils Typical Applications Coatings on concrete, fiberglass, etc Certified Thickness Standard STDP6. Standard D/Std 200 D1 PT-200D-S Advanced D/Adv 200 D3 PT-200D-A Included Probe PRB200D to measure Thick, soft coatings like polyurea, asphaltic neoprene, very thick polymers Measurement Range 50 to 7600 μm / 2 to 300 mils Certified Thickness Standard STDP1. Proven non-destructive ultrasonic technique conforms to ASTM D6132 and ISO 280. PosiTector SmartLink – Accepts coating thickness, environmental and surface profile probes. DeFelsko Corporation – USA
