Elcometer 224 Digital Surface Profile Gauge
Elcometer 224 Digital Surface Profile Gauge
ELCOMETER 224 E224C-BI Integral Gauge, E224C-TI Integral Gauge, E224C-BS Separate Gauge, E224C-TS Separate Gauge, Display information 2.4” (6cm) QVGA colour TFT display, 320 x 240 pixels, Battery type 2 x AA batteries, rechargeable batteries can also be used, Battery life Approximately 24 hours of continuous use at 1 reading per second#, Minimum Headroom Integral: 185mm (7.3”), Gauge dimensions (h x w x d) Integral: 168 x 73 x 37mm (5.61 x 2.87 x 1.46”), Separate: 141 x 73 x 37mm (5.55 x 2.87 x 1.46”), Gauge weight (including batteries), Integral: 218g (7.69oz), Separate: 161g (5.68oz), Measurement range 0-500μm (0-20mils), Probe tip Tungsten carbide tip 60° angle; Tip Radius: 50μm (2mil), Operating temperature -10 to 50°C (14 to 122°F) Storage temperature -10 to 60°C (14 to 140°F), Accuracy & Resolution Accuracy*: ±5% or ±5μm (±0.2mil); Resolution: 1μm (0.1mil), Packing List – Elcometer 224 gauge, glass zero tile†, 2 x calibration foils†, wrist harness, plastic transit case (T), protective case, screen protector, probe protection cap†, 2 x AA batteries, test certificate, operating instructions, USB cable (T) & ElcoMaster® software (T). Probe Design Flat Surface: Standard T224C500US 125mm (4.92”) 25mm (1.0”), Probe Design Flat Surface: Armoured T224C500UARM 165mm (6.50”) 25mm (1.0”), Convex Surface: Standard* T224C500UX 135mm (5.31”) 75mm (3.0”), Convex Surface: Armoured* T224C500UXARM 175mm (6.89”) 75mm (3.0”), Accessories for Integral Gauge & Separate Gauge – T22419793 Probe Tip Protection Cap T22420072 Glass Zero Tile with Wallet T22421882C Certified Calibration Test Kit: 125μm & 500μm (5 & 20mils) Calibration Foils, Glass Zero Tile & Calibration Certificate, T99921325 USB Cable, T99924797 USB Bluetooth® Adaptor (V2.0+) – for PC’s without Bluetooth®, T99922341 Self Adhesive Screen Protectors (x10), T22420053 Replacement Tip (Pack of 2) with Fixing Tool, T22420095 Replacement Tip (Pack of 5), T45622371 Benchtop Inspection Stand. Digital Surface Profile Gauge Model B & Model T Integral Gauge & Separate Gauge Elcometer Limited Manchester England India, (STANDARDS: ASTM D 4417-B, SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000)
