pH-indicator strips

The pH tests are suited for all media in environmental analysis and in industrial in-process controls. Our special method of manufacture gives the pH indicator strips decisive advantages over the indicator paper: since the indicator does not bleed, the strip can be left in the measurement medium without contaminating it.

Elcometer 138/2 T13820564 40 x Chloride Test Strips. Chloride Test Strips Chloride ions on a steel surface increase the probability that corrosion of the steel will take place even if a protective coating is applied. Chloride ions trapped under a coating in the presence of steel and moisture will form a corrosion cell. This corrosion process will result in premature failure of the protective coating and may cause blistering of coatings in immersion service. The chloride test strips will indicate the concentration of chloride ions in the sample solution and if the area of sample collection and the volume of water is known the concentration can be measured in parts per million or micrograms per millilitre.

Elcometer 138/2 T13820563 100 x Iron Test Strips. Iron Test Strips Ferrous ions are an indicator of the corrosion of steel as they are formed when the iron oxidises as a result of a corrosion cell formed between the steel and oxygen in the presence of water. The ferrous ion test strips will also indicate the concentration of ferrous ions in a sample solution in the same way as the chloride strips.

Elcometer 138/2 T13820562 100 x pH Test Strips. pH Test Strips These strips will determine if a solution or surface is acid or alkaline in nature. Acids form when certain gases are dissolved in water, for example chlorine in water produces hydrochloric acid, carbon dioxide in water produces carbonic acid, sulphur dioxide in water produces sulphuric acid all of which are corrosive to steel. The presence of these contaminants can either be detected in a solution washed from the surface or by putting a wet pH Test Strip on to the dry surface. pH does not measure the concentration but it does indicate how acidic or alkaline the surface is. Alkaline surfaces are normally associated with either concrete surfaces that are to be coated or steel re-enforcement bars buried in concrete.

HACH Chloride QuanTab® Test Strips, 30-600 mg/Product # L2744940, SEOH ColorpHast 9590-3EM Test Strips 0-14 pH (Box of 100), MERCK 109535. pH-indicator strips pH 0 – 14 Universal indicator, Hydrion (P-12M) 0-13 Mechanical pH Pencil. pH-indicator strips pH 6.5 – 10.0, 109502. pH-indicator strips pH 2.0 – 9.0, 109450. pH-Indicator strips pH 2.0 – 9.0, 109533. pH-indicator strips pH 5.0 – 10.0, 109531. pH-indicator strips pH 0 – 6.0, 109540. pH-indicator strips pH 0 – 2.5, 109542. pH-indicator strips pH 4.0 – 7.0, 109541. pH-indicator strips pH 2.5 – 4.5, 109545. pH-indicator strips pH 11.0 – 13.0, 109532. pH-indicator strips pH 7.5 – 14, 109584. pH-indicator strips pH 2.0 – 9.0. ph indicator strips how to use, ph indicator strips definition, ph indicator strips walmart, ph indicator strips walgreens, ph indicator strips merck, ph indicator strips 0-14, ph indicator strips 0-6, ph indicator strips india, chloride test strips low range, quantab salt test strips, chloride test strips high range, quantab chloride scale, chloride quantab® test strips, 30-600 mg/l, quantab chloride test strips chart, quantab instructions, chloride quantab® test strips, 300-6000 mg/l. Determine pH indicator strips. pH-Indicator Strips (Non-Bleeding). MColorpHast™ Non-Bleeding pH-Indicator Strips ph 4.0-7.0.


error: Content is protected !!